HPE7-A02 LATEST VERSION, HPE7-A02 EXAM SIMULATIONS

HPE7-A02 Latest Version, HPE7-A02 Exam Simulations

HPE7-A02 Latest Version, HPE7-A02 Exam Simulations

Blog Article

Tags: HPE7-A02 Latest Version, HPE7-A02 Exam Simulations, HPE7-A02 Examinations Actual Questions, Answers HPE7-A02 Real Questions, HPE7-A02 Valid Test Online

P.S. Free & New HPE7-A02 dumps are available on Google Drive shared by ITdumpsfree: https://drive.google.com/open?id=1wBRmjWPn19q2WKbKnjGbmi_jr4n_morz

Holding a Aruba Certified Network Security Professional Exam HPE7-A02 Certification in a certain field definitely shows that one have a good command of the HPE7-A02 knowledge and professional skills in the related field. However, it is universally accepted that the majority of the candidates for the Aruba Certified Network Security Professional Exam exam are those who do not have enough spare time and are not able to study in the most efficient way.

HP HPE7-A02 exam is a vendor-neutral certification exam that is recognized globally. It is a comprehensive exam that tests an individual's knowledge of network security concepts and practices. HPE7-A02 exam is designed to assess a candidate's ability to design, implement, and manage secure enterprise networks, and to identify and mitigate potential security risks. Passing the HP HPE7-A02 exam not only validates an individual's expertise in network security but also helps in career advancement by opening up new job opportunities and higher salaries.

HP HPE7-A02 Exam consists of 60 multiple-choice questions, which must be completed within 90 minutes. HPE7-A02 exam covers a wide range of topics, including network security fundamentals, secure network design, securing wireless networks, securing remote access, and implementing security policies and controls. Candidates are required to score at least 70% to pass the exam and earn the Aruba Certified Network Security Professional certification.

>> HPE7-A02 Latest Version <<

Free PDF 2025 HPE7-A02: High Hit-Rate Aruba Certified Network Security Professional Exam Latest Version

Frankly speaking, it is difficult to get the HPE7-A02 certificate without help. Usually, the time you invest to prepare the exam is long. Now, all of your worries can be wiped out because of our HPE7-A02 exam questions. Some people worry about that some difficult knowledge is hard to understand or the HPE7-A02 test guide is not suitable for them. Actually, the difficult parts of the exam have been simplified, which will be easy for you to understand. Also, there will be examples, simulations and charts to make explanations vivid. In order to aid you to memorize the Aruba Certified Network Security Professional Exam exam cram better, we have integrated knowledge structure. You will clearly know what you are learning and which part you need to learn carefully. You will regret if you give up challenging yourself.

HP HPE7-A02 Exam is designed for professionals who want to validate their knowledge and skills in network security. Aruba Certified Network Security Professional Exam certification exam is a part of the Aruba Certified Network Security Professional (ACNSP) certification program, which is offered by Hewlett Packard Enterprise. The ACNSP certification program aims to equip professionals with the necessary skills to design, implement, and manage secure network infrastructures.

HP Aruba Certified Network Security Professional Exam Sample Questions (Q24-Q29):

NEW QUESTION # 24
Refer to the exhibit.

The exhibit shows a saved packet capture, which you have opened in Wireshark. You want to focus on the complete conversation between 10.1.70.90 and 10.1.79.11 that uses source port 5448.
What is a simple way to do this in Wireshark?

  • A. Click the Source column and then the Destination column to sort the packets into the desired order.
  • B. Apply a capture filter that selects for TCP port 5448.
  • C. Apply a capture filter that selects for both the 10.1.70.90 and 10.1.79.11 IP addresses.
  • D. Right-click one of the packets between those addresses and choose to follow the stream.

Answer: D

Explanation:
* Wireshark: Follow TCP Stream:
* Wireshark provides an intuitive feature to filter and display a complete TCP conversation.
* By right-clicking any packet within the conversation and selecting "Follow # TCP Stream", Wireshark isolates and displays the entire conversation.
* This feature allows you to view the communication in a simplified, sequential manner, including requests and responses.
* Option Analysis:
* Option A: Incorrect. Capture filters only apply during packet capturing, not for analyzing already saved packet captures.
* Option B: Incorrect. Sorting packets helps with organizing data but does not isolate a complete conversation.
* Option C: Incorrect. A capture filter for TCP port 5448 would have to be applied before capturing; it does not work for saved data.
* Option D: Correct. Right-clicking a packet and choosing "Follow TCP Stream" is the simplest way to display the full conversation between 10.1.70.90 and 10.1.79.11 on port 5448.
Steps in Wireshark to Follow a TCP Stream:
* Locate any packet within the desired conversation (e.g., between 10.1.70.90 and 10.1.79.11 on TCP port 5448).
* Right-click on the packet.
* Choose "Follow" # "TCP Stream".
* Wireshark will display the entire TCP conversation, including both directions of communication.
This feature is especially useful when troubleshooting or analyzing detailed interactions between hosts.


NEW QUESTION # 25
You need to create a rule in an HPE Aruba Networking ClearPass Policy Manager (CPPM) role mapping policy that references a ClearPass Device Insight Tag. Which Type (namespace) should you specify for the rule?

  • A. Device
  • B. Application
  • C. Endpoint
  • D. TIPS

Answer: C

Explanation:
* ClearPass Role Mapping Policy:
* The Endpoint namespace is used to reference attributes and tags related to endpoint devices.
* Device Insight Tags are part of endpoint profiling information and are stored in the Endpoint Repository.
* Option Analysis:
* Option A: Correct. The Endpoint namespace includes Device Insight Tags.
* Option B: Incorrect. TIPS refers to system attributes and configuration data, not endpoint tags.
* Option C: Incorrect. Device is not a valid namespace in this context.
* Option D: Incorrect. Application relates to application-level attributes, not Device Insight Tags.


NEW QUESTION # 26

You have downloaded a packet capture that you generated on HPE Aruba Networking Central. When you open the capture in Wireshark, you see the output shown in the exhibit.
What should you do in Wireshark so that you can better interpret the packets?

  • A. Choose to decode UDP port 5555 packets as ARUBA_ERM and set the Aruba ERM Type to 0.
  • B. Edit preferences for IEEE 802.11 and chose to ignore the Protection bit with IV.
  • C. Edit the Enabled Protocols and make sure that 802.11, GRE, and Aruba_ERM are enabled.
  • D. Apply the following display filter: wlan.fc.type == 1.

Answer: A

Explanation:
To better interpret the packets shown in the Wireshark capture, you should choose to decode UDP port 5555 packets as ARUBA_ERM and set the Aruba ERM Type to 0. This configuration will allow Wireshark to properly decode and display the Aruba-specific encapsulated remote mirroring (ERM) packets, providing a clearer understanding of the traffic.
1.Decoding Protocols: Selecting the correct protocol decoding in Wireshark ensures that the captured packets are interpreted correctly, displaying the relevant information.
2.Aruba ERM: The packets in the capture are likely encapsulated remote mirroring (ERM) packets specific to Aruba, which require proper decoding settings in Wireshark.
3.Clear Interpretation: By setting the Aruba ERM Type to 0 and decoding the packets as ARUBA_ERM, you can view the encapsulated data accurately.


NEW QUESTION # 27
A port-access role for AOS-CX switches has this policy applied to it:
plaintext
Copy code
port-access policy mypolicy
10 class ip zoneC action drop
20 class ip zoneA action drop
100 class ip zoneB
The classes have this configuration:
plaintext
Copy code
class ip zoneC
10 match tcp 10.2.0.0/16 eq https
class ip zoneA
10 match ip any 10.1.0.0/16
class ip zoneB
10 match ip any 10.0.0.0/8
The company wants to permit clients in this role to access 10.2.12.0/24 with HTTPS. What should you do?

  • A. Add this rule to zoneC: 5 ignore tcp any 10.2.12.0/24 eq https
  • B. Add this rule to zoneB: 5 match tcp any 10.2.12.0/24 eq https
  • C. Add this rule to zoneA: 5 ignore tcp any 10.2.12.0/24 eq https
  • D. Add this rule to zoneC: 5 match any 10.2.12.0/24 eq https

Answer: D

Explanation:
Comprehensive Detailed Explanation
* The requirement is to permit HTTPS traffic from clients to the 10.2.12.0/24 subnet.
* ZoneC is configured to drop all HTTPS traffic to the 10.2.0.0/16 subnet. Therefore, the first match in the zoneC class (priority 10) will drop the desired traffic.
* To override this behavior, you must add a higher-priority rule (lower rule number) to zoneC that explicitly matches 10.2.12.0/24 and permits the traffic.
Thus, adding the rule 5 match any 10.2.12.0/24 eq https to zoneC ensures the desired traffic is permitted while maintaining the drop behavior for the rest of 10.2.0.0/16.
References
* AOS-CX Role-Based Access Control documentation.
* Understanding class priority and policy rule ordering in AOS-CX.


NEW QUESTION # 28
A ClearPass Policy Manager (CPPM) service includes these settings:
* Role Mapping Policy:
* Evaluate: Select first
* Rule 1 conditions:
* Authorization:AD:Groups EQUALS Managers
* Authentication:TEAP-Method-1-Status EQUALS Success
* Rule 1 role: manager
Rule 2 conditions:
* Authentication:TEAP-Method-1-Status EQUALS Success
* Rule 2 role: domain-comp
Default role: [Other]
Enforcement Policy:
* Evaluate: Select first
* Rule 1 conditions:
* Tips Role EQUALS manager AND Tips Role EQUALS domain-comp
* Rule 1 profile list: domain-manager
Rule 2 conditions:
* Tips Role EQUALS manager
* Rule 2 profile list: manager-only
Rule 3 conditions:
* Tips Role EQUALS domain-comp
* Rule 3 profile list: domain-only
Default profile: [Deny access]
A client is authenticated by the service. CPPM collects attributes indicating that the user is in the Contractors group, and the client passed both TEAP methods.
Which enforcement policy will be applied?

  • A. domain-only
  • B. domain-manager
  • C. manager-only
  • D. [Deny Access Profile]

Answer: D

Explanation:
1. Understanding the Role Mapping Evaluation:
* Role mapping is set to "Evaluate: Select first," meaning the first rule that matches the client attributes will determine the role(s) assigned.
* Contractors group: Since the client is in the Contractors group (not Managers), Rule 1 in the Role Mapping Policy does not match.
* TEAP-Method-1-Status EQUALS Success: This condition matches Rule 2, so the client is assigned the domain-comp role.
* No other rules match, so the default role [Other] is not applied.
2. Resulting Role from Role Mapping Policy:
* The client is assigned the domain-comp role.
3. Enforcement Policy Evaluation:
* Enforcement policy is also set to "Evaluate: Select first," so the first matching rule determines the enforcement profile.
* Rule 1 (Tips Role = manager AND domain-comp):
* The client only has the domain-comp role, not manager, so this rule does not match.
* Rule 2 (Tips Role = manager):
* The client does not have the manager role, so this rule does not match.
* Rule 3 (Tips Role = domain-comp):
* This rule matches the client's role, but it is not evaluated because the enforcement policy already skipped to the default action after failing the first two rules.
4. Default Enforcement Profile:
* Since no rule explicitly matches and the policy evaluation stops at the default, the default profile [Deny Access Profile] is applied.
Final Outcome:
The client is denied access because none of the matching rules satisfy the conditions.
References
* Aruba ClearPass Policy Manager Role Mapping and Enforcement Policies Guide.
* Role and Policy Evaluation Logic for ClearPass Authentication Services.


NEW QUESTION # 29
......

HPE7-A02 Exam Simulations: https://www.itdumpsfree.com/HPE7-A02-exam-passed.html

2025 Latest ITdumpsfree HPE7-A02 PDF Dumps and HPE7-A02 Exam Engine Free Share: https://drive.google.com/open?id=1wBRmjWPn19q2WKbKnjGbmi_jr4n_morz

Report this page